Wednesday, 3 February 2016

Edit Screen grabs and wrapping up



A quick look into the editing process, first thing to note is that I choose to use Premier over Final cut or Avid, while I may have some experience using the older version of final cut 7 the newer versions are very different and not very usable from a professional stand point, as for avid I have no experience using it at all and given my slighty limited knowledge of editing had no wish to mess around learning a new editing program in the time I had, so I came to using Adobe premier and given that the film was to be a film noir the first thing I did was create an over laying adjustment layer that gives all the layers under it the following effects
- Crop
- Black and White
- Luma Curve adjustment

Black and white does as it says on the tin, the cropping gives the film a black bars effect, and the luma curve helps adjust the lighting so it's easier to distinguish objects in black and white, when I made the colour export of this piece I had to disable both the black and white and the Luma curve




The fight scene while OK in it's own merit, looking back should have really been filmed at the end of the piece and on the set. The sound effects for the hits were lined up as close as I could to impacts within the stop motion, I used 4 different impact sounds to try create variety for the piece although as enthusiastic as my actors were I chose not to add their grunting into the fight scene.





In this scene it's the first hint of the Orange hunting down Miss Le-mon and I wanted to reinforce his villainous image once more before you see him on set, a sinister shadow against the already established window to Crunchs office with a crack of thunder and flash of lightning makes for a nice break up of Crunch and Le-mons otherwise rather long and boring Dialogue.




Ah the lime and the gun, the gun is actually a modified lego gun off a star wars snow speeder pilot although I had to cut the top off the get rid of the huge scope it had attached, once again here you see the wreckage after the fight scene really thrown about to cover the Lime and the Lemons standing pieces of blue tack and pennys, it can be argued by the image on the left that this doesn't help, but as I mentioned before the above layer crops all lower layers and gives the cinematic black bars effect, what I didn't mention above was that I also resize most of the frames and pushed them upwards to get rid of excess head room when making the piece.




Scripting and progress

Moving on into the scripting process I had carefully written the script into three page and am now  rewritting it to include more fruit based terminology.

I also looked into the Maltese falcon and general film noir research, there appears to be a lot of harse lighting used and the music tends to flow smoothly in the background to create a flow on screen

Wednesday, 27 January 2016

Filming updates and work arounds


First and foremost when making the piece I had to choose the settings that I choose when I first fiddled with the camera and the format that I would be shooting on, I choose to use L and Raw so that I would have a choice between Jpeg and Raw shots when it came to the editing process I would have the choice between the two Weather it be the easy and fast use afforded by Jpegs Or The complex flexibility given by raw images, although Raw images do have the draw back that they can be used with few programs unlike the almost universal Jpeg. Another factor to note here is that while the ISO says 200 I noticed my mistake while reviewing these images and Changed it to an ISO of 400 to avoid getting overly grainy images


For the very first shot I made this fake wall so that I could create the fake window for the shot. This wall was then used again later for the oranges shadow against the wall.






After coming back from the winter break I discovered that the card that makes up my set had bent due to the humidity of the room, because of this I had to repair the walls as best I could eventually I used these metal Shelve ends to hold up the wall supported by a generous amount of duct tape. This raised another issue as I had the supports of the shelve ends coming under the walls and onto set this was easily fixed by adding a fake floor above the supports.

  
A look at the set fully lit and ready to be animated



This next set shows the end fix of an issue that arose during the planning process, While I wanted to show a particular angle with the camera I had no way of doing so because of the positions of the table and wall, By removing the base of the tripod and making temporary holders for it's legs I was able to re-position it in a way that allowed me get the shot that I wanted


Before I go into what this picture shows, you would not believe how hard it is to get a Small noir-y pistol for fruit. In the end I cut the top off Lego Han Solos blaster and I still think it's a little on the small side.




The next and possibly biggest Issue in my piece was the fact that both Miss Le-mon and Limey needed support underneath or they would fall over again and again. the problem was the support showing in shot, this was fixed by either hiding the support behind an object such as the draw or lifting the shot so the bottom of the character was not shown.