Wednesday, 27 January 2016

Filming updates and work arounds


First and foremost when making the piece I had to choose the settings that I choose when I first fiddled with the camera and the format that I would be shooting on, I choose to use L and Raw so that I would have a choice between Jpeg and Raw shots when it came to the editing process I would have the choice between the two Weather it be the easy and fast use afforded by Jpegs Or The complex flexibility given by raw images, although Raw images do have the draw back that they can be used with few programs unlike the almost universal Jpeg. Another factor to note here is that while the ISO says 200 I noticed my mistake while reviewing these images and Changed it to an ISO of 400 to avoid getting overly grainy images


For the very first shot I made this fake wall so that I could create the fake window for the shot. This wall was then used again later for the oranges shadow against the wall.






After coming back from the winter break I discovered that the card that makes up my set had bent due to the humidity of the room, because of this I had to repair the walls as best I could eventually I used these metal Shelve ends to hold up the wall supported by a generous amount of duct tape. This raised another issue as I had the supports of the shelve ends coming under the walls and onto set this was easily fixed by adding a fake floor above the supports.

  
A look at the set fully lit and ready to be animated



This next set shows the end fix of an issue that arose during the planning process, While I wanted to show a particular angle with the camera I had no way of doing so because of the positions of the table and wall, By removing the base of the tripod and making temporary holders for it's legs I was able to re-position it in a way that allowed me get the shot that I wanted


Before I go into what this picture shows, you would not believe how hard it is to get a Small noir-y pistol for fruit. In the end I cut the top off Lego Han Solos blaster and I still think it's a little on the small side.




The next and possibly biggest Issue in my piece was the fact that both Miss Le-mon and Limey needed support underneath or they would fall over again and again. the problem was the support showing in shot, this was fixed by either hiding the support behind an object such as the draw or lifting the shot so the bottom of the character was not shown.